Tag Archives: Lean Initiatives

In the OR with Dale Schroyer

by
Dale%20Schroyer

Dale Schroyer – Sr. Consultant & Project Manager

I generally find that in healthcare, WHEN something needs to happen is more important than WHAT needs to happen.  It’s a field that is rife with variation, but with simulation, I firmly believe that it can be properly managed.  Patient flow and staffing are always a top concern for hospitals, but it’s important to remember that utilization levels that are too high are just as bad as levels that are too low, and one of the benefits of simulation in healthcare is the ability to staff to demand.

Check out Dale’s work with Robert Wood Johnson University Hospital where they successfully used simulation to manage increased OR patient volume: 

About Dale

Since joining ProModel in 2000, Dale has been developing simulation models used by businesses to perform operational improvement and strategic planning. Prior to joining ProModel Dale spent seven years as a Sr. Corporate Management Engineering Consultant for Baystate Health System in Springfield, MA where he facilitated quality improvement efforts system wide including setting standards and facilitating business re-engineering teams. Earlier he worked as a Project Engineer at the Hamilton Standard Division of United Technologies.

Dale has a BS in Mechanical Engineering from the University of Michigan and a Masters of Management Science from Lesley University. He is a certified Six Sigma Green Belt and is Lean Bronze certified.

NEW! ProModel’s Patient Flow Solution:

http://patientflowstudio.com/

ProModel Healthcare Solutions:

http://www.promodel.com/Industries/Healthcare

Power of Predictive Analytics for Healthcare System Improvement and Patient Flow

by

Hospitals are currently under intense pressure to simultaneously improve the effectiveness and efficiency of healthcare delivery in an environment where operating costs are being reduced, downsizing and consolidation is the norm, and cost for care is increasing while revenue is decreasing.  At the same time the systemic effects of peak census and varying demand on patient LOS are creating capacity issues and unacceptable patient wait times…leading to a major decline in patient satisfaction.

The amount of proposals to enhance a hospitals quality care are as numerous as the healthcare professionals dedicated to the cause.  What hospitals need however is the ability to quickly and accurately evaluate the impact of those various operational proposals and to experiment with system behavior without disrupting the actual system – and ProModel’s simulation technology is allowing them to do just that.

The predictive analytic capability of ProModel simulation will allow healthcare professionals to test assumptions and answer those patient flow “what if” questions in a matter of minutes and days, not weeks and months.  Simply put, it’s providing a decision support system to assist healthcare leaders in making critical decisions quickly with a higher degree of accuracy and confidence.

Simulation will also help healthcare staff quickly identify room availability and recognize high risk patient flow bottlenecks before extreme problems occur.  This invaluable knowledge will then lead to reductions in patient wait times and LOS, avoid unnecessary re-admissions and costly expansions, and most importantly – increase the overall quality of service and patient satisfaction.

Flanagan Industries Brings New Facility Online Thanks To ProModel Solution

by

Flanagan Industries is a major contract manufacturer of aerospace hardware specializing in highly engineered and high value machined components and assemblies.  Over the years their manufacturing operations had been growing steadily to the point where they absolutely needed additional capacity . The original space was not conducive to a manufacturing environment and had become an impediment to taking on more business and staying competitive in the global economy.  So Flanagan decided to expand by opening a new facility that could house bigger and better machinery, however they needed to ensure that the move to the new location would not disrupt their current operations and customer orders.

In the video below, see how Flanagan used a ProModel Simulation Solution to successfully bring their new facility online:

 

 

 

Demystifying System Complexity

by
Charles Harrell, Founder ProModel Corporation

Charles Harrell, Founder ProModel Corporation

One can’t help but be awe struck, and sometimes even a little annoyed, by the complexity of modern society. This complexity spills over into everyday business systems making them extraordinarily challenging to plan and operate. Enter any factory or healthcare facility and you can sense the confusion and lack of coordination that often seems to prevail. Much of what is intended to be a coordinated effort to get a job done ends up being little more than random commotion resulting in chance outcomes. Welcome to the world of complex systems!

A “complex system” is defined as “a functional whole, consisting of interdependent and variable parts.” (Chris Lucas, Quantifying Complexity Theory, 1999, http://www.calresco.org/lucas/quantify.htm) System complexity, therefore, is a function of both the interdependencies and variability in a system. Interdependencies occur when activities depend on other activities or conditions for their execution. For example, an inspection activity can’t occur until the object being inspected is present and the resources needed for the inspection are available. Variability occurs when there is variation in activity times, arrivals, resource interruptions, etc. As shown below, the performance and predictability of a system is inversely proportional to the degree of interdependency and variability in the system.

Untitled-1

Suppose, for example, you are designing a small work cell or outpatient facility that has five sequential stations with variable activity times and limited buffers or waiting capacity in between. Suppose further that the resources needed for this process experience random interruptions. How does one begin to estimate the output capacity of such a system? More importantly, how does one know what improvements to make to best meet performance objectives?

Obviously, the larger the process and greater the complexity, the more difficult it is to predict how a system will perform and what impact design decisions and operating policies will have. The one thing most systems experts agree on, however, is that increasing complexity tends to have an adverse effect on all aspects of system performance including throughput, resource utilization, time in system and product or service quality.

For Charleys new blog

ProModel and Medmodel are powerful analytic tools that are able to account for the complex relationships in a system and eliminate the guesswork in systems planning. Because these simulation tools imitate the actual operation of a system, they provides valuable insights into system behavior with quantitative measures of system performance.

To help introduce process novices to the way interdependencies and variability impact system performance, ProModel has developed a set of training exercises using an Excel interface to either ProModel or MedModel. Each exercise exposes the initiate to increasingly greater system complexity and how system performance is affected. Additionally, these exercises demonstrate the fundamental ways system complexity can be mitigated and effectively managed.

ProModel is offering these exercises to students and practitioners who are seeking an introduction to simulation and systems dynamics.

 

For more information please contact ProModel Academic

Sandra Petty, Academic Coordinator  spetty@promodel.com

Busy Season at ProModel

by
Keith Vadas

Keith Vadas – ProModel President & CEO

I am pleased to report ProModel’s second quarter was very positive.  Like many businesses in the US we find ourselves on a serious upswing this Summer of 2014.  Our consultants are working on several projects in a variety of industries, including ship building, power management, retail, manufacturing, food processing, and government contracting.  In all of these projects our experienced team of consultants is working to improve efficiency, save money, and make better decisions for their clients.

ProModel’s DOD projects continue to thrive.  It is hard to believe it has been eight years since we started working with FORSCOM (US Army Forces Command)   on AST (ARFORGEN SYNCHRONIZATION TOOL).  LMI-DST (Lead Materiel Integrator – Decision Support Tool) with the LOGSA Team (US Army Logistics Support Activity) is also going strong.  Our agile team of software developers keeps improving the development process within ProModel and it shows. Just recently the NST Airframe Inventory Management Module was Granted Full Accreditation by the Commander, Naval Air Systems Command.

The time is also ripe for opportunities in Healthcare.  Our patient flow optimization capabilities are perfect for helping hospitals and outpatient clinics improve efficiencies.  Now that the Affordable Care Act has been around for a couple of years, its impact is being felt by healthcare organizations around the country.  The expanded insured-base, and the need for improved processes and different care models is making it absolutely necessary to consider the value of modeling and simulation.  ProModel continues to work with several facilities including Presbyterian Homes and Services, and Array Architects who enhance the flow in Healthcare Facilities design by using MedModel simulation in their design processes.

To better support our base of existing customers, we just released ProModel/MedModel 2014 in July and PCS Pro 2014 at the end of Q1.  EPS 2014 (Enterprise Portfolio Simulator) was released in Q2  and includes a new easy to use, web-based rapid scenario planning tool – Portfolio Scheduler.  You can check this tool out online at – http://portfoliostud.io/#.

There continue to be lots of exciting things happening at ProModel.  We have an outstanding team of consultants and software developers-designers just looking for an opportunity to PARTNER with you to help you meet the next business challenge, or solve the next unexpected problem.

ProModel and MedModel 2014

by
Kevin Field

Kevin Field – Sr. Product Manager

In regards to this release, I would like to start out by saying, in the words of Nacho Libre, “It’s pretty dang exciting, huh?”

With ProModel and MedModel 2014 we’ve tried to keep our current customers in mind as well as new customers. For current customers, the new logic windows with Intellisense and Syntax Guide should help you build models faster and easier. And being able to import graphics from third party graphic programs like Photoshop, Gimp, Paint.Net, etc. should even be more useful now that you can rotate all graphic types in the application. The improvements to the Debug window are a direct result of our work on the new logic windows.

For our new customers, the redesigned Getting Started panel (formerly known as the Control Panel) brings a lot of model building resources to the forefront. We have added new demo models and refreshed several of our previous ones. Did anyone even know we had a Quickstart video, showing you how to build a simple model and analyze results in 10-15 minutes? The most exciting part might be the How To videos our Support team has been producing for several months now. All of our customers will find these extremely helpful.

In this blog I am going to casually comment on some of the new features with the assumption that you have already reviewed What’s New in 2014 and perhaps even viewed the webinar I gave on this release. If not, you might want to consider doing so, otherwise…you can blissfully continue on with me…

New Logic Windows

It’s amazing what a few simple colors can do to help your logic be more readable. As we were developing version 9.1, I found it more and more difficult to go back to 8.6 and “drag” myself through the dreary old plain black text 🙂 It’s funny how refreshing it was to get back to 9.1! Not only the color but also line numbers really make it easy to quickly get around in the logic.

1

 

 

 

 

 

 

 

And if you don’t like our default color scheme or want to have something a little easier on the eyes, simply customize the colors in the Logic Color Selection dialog.

2

 

 

 

 

 

 

We also want to encourage good formatting in the new Logic windows by utilizing white space (spaces, line breaks, etc.) and indentation. Don’t be afraid of it! By automatically indenting and out-denting after begin and end brackets, we hope to make co-workers everywhere more willing to leap in and review your logic with you! Auto-formatting is something we are looking to improve moving forward.

Another thing we have made steps to do is deprecate certain logic elements. Begin, End, and the # comment are the main ones. Don’t worry though, they are not completely gone! They won’t show up in the Intellisense list but they will still compile if used in logic. Begin and End are easier to read and enter in logic if you use the “squiggly” brackets { and } instead. And we want to use the # character for other things like the new #region statement.

In fact, #region is one of my favorite new additions to 2014. I love the ability it gives you to section your logic and collapse it with a label describing what’s inside that hidden portion of your logic. I hope you’ll find it quite useful.

Intellisense and Syntax Guide

These new features are probably the heroes of this release. Intellisense brings every statement, function, location, entity, variable, subroutine (I’m saying every model element!) right to your fingertips. You should almost never have to remember your element names or copy them from one place in logic to another, or even leave a module to go look it up. Besides that, the days of completely typing any logic or element name are gone. This should increase your productivity by at least 10-15% 🙂 Are you with me on this?!

3

Intellisense coupled with the Syntax Guide should nearly make the Logic Builder obsolete. There may be a few things we need to add in order to make that happen. Please feel free to share any suggestions you may have. We tried to make both unobtrusive to your logic creation and editing. Because of this, we didn’t add an option to hide Intellisense or the Syntax Guide.

4

 

 

 

Debug Window

MORE THAN 3 LINES!! I think that’s all I need to say on that.

Ok, I’ll also say that debugging should almost be a joyous endeavor as you are now able to anticipate what logic may get executed next and better understand where you came from.

Routing Probability

I’m going to refer you to the webinar I gave on this new feature. In it I give a great example (if I do say so myself) of how simple it is to set up a routing probability for scenario analysis. One thing to remember, in order to use an array in the routing Probability field, the array must be initialized through an import.

Getting Started Panel

The new panel that appears when you start the program may primarily be geared toward new users, however current customers may find it just as useful. Access to the How To videos, online Help, and additional training resources (like dates of future ProModel training classes and a link to ProModel University, our online self-paced training).

5

If you haven’t taken advantage of your M&S contract and utilized our Technical Support team then perhaps the Getting Started panel will help facilitate this. They are a tremendous resource to assist you in understanding different techniques for modeling aspects of your systems, troubleshooting your models and helping you get out of the paper bag you may have coded yourself into, or just a friendly person to talk to 🙂 We like to call them your “ProModel Friend”.

Speaking of the Support team, they have done a tremendous job of generating a lot of How To and Solution videos for quite some time now. The short videos range from 2-5 minutes and offer useful insight into modeling techniques and other useful software tips. Let us know if you have any suggestions for more videos!

New Graphic Libraries

A final word about our new graphic libraries. In order to create new libraries containing EMF (vector-based) files, which scale nicely when zoomed, we had to support the rotation, flipping, and sizing of these image types within ProModel. This makes it so you don’t have to generate an image for every possible rotation or flip you need to have for your animation. This reduces the size of the graphic library and thus your model footprint as well. So with this new capability, you should be using a third party graphics program like Photoshop or Gimp (which is free) to create your graphics. (Or perhaps get your coworker to do it, just don’t tell them that I suggested it.)

I can’t talk about the new graphic libraries without mentioning Laif Harwood, a member of our Support team. Laif gets credit for creating all the new graphics in the libraries. And a fine job he did! So if you want any tips on how to do it for yourself, give our Support team a call!

Well, that’s all I have steam for yammering about today. Remember…you have a ProModel Friend that’s just an email (support@promodel.com) or phone call away (888-PROMODEL).

 

The ProModel Training Experience

by

RPriceHere at ProModel we realize that successful use of our tools usually begins with great training. To that end, we have a variety of training options available. The course you choose will depend on your product and situation. These options are described on our Training page. This post is about our classroom based trainings, our facilities, and what you can expect if you choose to join us! Regardless of your experience with business travel, it’s usually nice to know what to expect when you reach your destination.

We have regularly scheduled classes held in Allentown, Pennsylvania, and Orem, Utah. These classes usually last two or three days (depending on the course) and run from 8:30 am to 5:00 pm local time, with an hour break for lunch.

Our classrooms are set up with a computer for each student and a projector screen at the front. Your instructor will demonstrate and explain new concepts and then allow you time for hands-on implementation of the exercises on your training computer. If you bring your own laptop or wireless device, you are welcome to use our classroom Wi-Fi connection to access the internet during breaks.

Usually we have between three to six students in a class at a time, so you’ll have plenty of time and attention from our instructors, as well as an opportunity to get to know other ProModel customers and hear of their experiences and applications of the tool. We provide drinks and snacks throughout the day, but then “set you free” to grab lunch on your own. Frequently students will explore new restaurants together, but we understand that some clients need time on their lunch hour to catch up with business at the office.

We’ll start with a walkthrough of the Orem Training Facilities. You’ll want to fly into the Salt Lake City International Airport (SLC). Our office is less than an hour south of the SLC airport. For a Google map with directions to our office (and other local amenities), click here. You know you’re in the right place if you see this building:

It might be white and covered with snow, but don’t worry about the weather, that just means good skiing in the mountains. Seriously, though, Utah is well prepared for snowy conditions and getting around in winter weather is not usually a problem. The snow typically melts within a day or two in “the valley” (where we are) and sticks around up in “the mountains.” Our offices are in the east side of building C. You can take the elevator or the stairs to the third floor. As you exit the elevator (or stairs), you’ll be in our lobby. The entrance to our Orem training room is right there in the lobby.

The training room is equipped with computers for each student.

And a beautiful view out the window of Mount Timpanogos (which rises to 11,749 ft):

Allentown Office

If you plan on joining us in Pennsylvania, you can view a Google map with our location and surrounding amenities by clicking here. If flying, you may want to consider flying in to Lehigh Valley (ABE) – a very short drive to the office, Philadelphia (PHL), or Newark (EWR).

You know you’re in the right place when you see this building:

Our offices are on the third floor (just like in Orem–we must like the third floor). Just head down the hall and you’ll see the entrance to the Allentown training room on your left.

In both offices we have kitchen facilities you are welcome to use, including a microwave, fridge, K-cup coffee machine, and complimentary snacks.

We hope this information helps you feel welcome and excited for a visit to our training facilities. If you have any questions about travel, accommodations, training content or schedules, please don’t hesitate to call or email.

General Training course information can be found here and additional company facility and travel information can be found here.

Rochelle Price, Director of Training Services

rprice@promodel.com

801-223-4667

Mitigating the Hawthorne Effect with Bruce Gladwin

by
Bruce Gladwin, PMP - Vice President, Consulting Services

Bruce Gladwin, PMP – Vice President, Consulting Services

With over 25 years of experience in the simulation field, Bruce has worked with major corporations worldwide developing hundreds of models across a wide range of industries. In his 19-year tenure with ProModel, he has served as a Product Manager, Senior Consultant, and Simulation Trainer. Bruce was named VP of Consulting Services in 2005 and has oversight responsibility for ProModel’s Consulting and Customer Service Operations.

Bruce received a BS in Systems Engineering from the University of Arizona and an MBA from Brigham Young University. He is a certified expert in Lean production principles and received his Six Sigma Black Belt certification while employed at General Electric’s Power Systems division.

Key projects include:

  • Capacity analysis for GE Energy Products Europe – determined the maximum production capacity for gas turbine components at GE’s European manufacturing facility resulting in a savings of $9.6M  in capital avoidance.
  • Design of a green-field manufacturing site for production of GE industrial generators – resulted in a savings of $1.2M in capital avoidance and identified the need for an accelerated operator training program.
  • Design and analysis of a disassembly process for the Russian-built SS25 Intercontinental Ballistic Missile (ICBM) in support of the 1991-92 START treaties between the US and the Soviet Union

Check out Bruce’s presentation on the Hawthorne Effect from the 2013 Winter Simulation Conference and his work with a major home improvement retailer…

ProModel on The Lean Nation

by

ProModel’s Bruce Gladwin (V.P., Consulting) and Dave Tucker (Director, LSS Initiatives) join web and radio host Karl Wadensten on “The Lean Nation” to discuss the benefits of ProModel Simulation in lean initiatives.  Enjoy!